Product Description
About the 18″ Laser Engraving Plate
Shortly after Sherline purchased a new engraving laser from Jimani we decided to manufacture our own laser engraving tooling plate. Jimani was already using our rotary table, and since we make our own X/Y tables we believed that we could build a custom X/Y table with a tooling plate that would enhance the operation of the laser while adding ease and versatility to set-ups.
The tooling plate is 8″ x 18″ x ¾” black anodized 6061 aluminum.
This tooling plate was designed to mount on our 18″ Industrial X/Y Slide (P/N 6540/6541). The slide has 5″ of Y-axis travel and 13.6″ of X-axis travel. Handwheels are calibrated in .001″ increments for P/N 6540 and in .01mm increments for P/N 6541.
We at Sherline Products believe that our 8″ x 18″ laser engraving tooling plate will be a great addition to any engraving laser. Custom tooling plate hole patterns can be quoted upon request.
Some of the Features of the Tooling Plate
- (115 Green) Dual purpose ¼” holes, on 1″ centers. These holes are threaded ¼-20 on the bottom and reamed to ¼” on the top. This allows each hole to be used as a “part locating” hole when you insert a ¼” dowel pin. Each hole can also be used as a clamping hole using the ¼-20 thread.
- In addition to the ¼-20 holes, the plate also has (16 Red) 10-32 holes which are positioned to mount our Sherline rotary table (P/N 8730) and tilting angle plate (P/N 3750).
- There are (5 Black) ¼” through holes for locating the tooling plate square to the table.
- There is one (Purple) 5/16″ oiler access hole so you can fill the mill saddle oiler without removing the tooling plate.
- There are (10 Blue) T-nut mounting holes to assemble the plate to our mill table.
See diagram below for hole location and description.