CNC Linear Controller with Stepper Motor

-

Clear selection

Product Description

The  stand-alone controller is programmable from its own keypad and controls the function of the stepper motor to which it is attached. The stepper motor may be applied to any axis of a CNC-Ready Sherline machine.

An 8-pin mini-DIN cable can be used to connect multiple units in a “daisy chain”. The units can signal each other to work in sequence, allowing multiple movements to be accomplished without the use of a computer or master CNC controller. They can also be used in conjunction with existing CNC controllers. The controller is user-programmable with two separate programs of up to 40 operations each. In each block, you can control distance, direction, speed and whether the program pauses or proceeds to the next block.

The linear controller can also be “daisy chained” with Sherline’s rotary controller to achieve combinations of rotary and linear movement in sequence. This makes it easy to set up for relatively sophisticated operations like cutting gears without having to know anything about CNC programming beyond what is entered from these simple keypads.

Items included with the CNC Linear Controller:

  • Linear Controller w/Keypad
  • Power Supply
  • #23 Frame Size Stepper Motor
  • Cables
  • Complete instructions

NOTE: If you wish to apply CNC linear control to an axis of a Sherline machine that does not have a stepper motor mount, see P/N 8850

About the Controller Power Supply Current

The controller power supply is 110-240VAC compatible. It automatically switches from 110V to 240V for countries with 220-240 volt electrical current. The original power supply that we offered with this product was 110 VAC only.


warning-symbol

The improper use of machine tools and their accessories can result in serious injury. Before using this tool, thoroughly read the instructions and make sure you understand its proper and safe use.

safety-glasses-symbol

Always wear safety glasses when operating machine tools.

Download 8800 Inch PDF Instructions

Instructions PDF Download

Download 8810 Metric PDF Instructions

Instructions PDF Download

Power Supply Input: 115 VAC 50/60 Hz, Output: 24V, 1 Watt
Stepper Motor 100 oz-in, 2 Amp, #23 Frame size, 400 steps per revolution
Speed 1″/min. to 25 in/min (programmable)
Distance from 0.0005″ to 9.9995″ in steps of 0.0005″
Backlash Compensation Programmable
67127 Stepper motor assembly
87041 120 VAC power supply (24 VDC, 1 amp output)
87250 Stepper motor-to-control box 6’ extension cable
87350 Single 5-pin mini-DIN limit switch cable or ½ of daisy-chain cable
88010 Linear controller/keypad unit complete